0010010 nbsp; 0010010 nbsp; 0010010 nbsp; window glueFeatures:

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 1. The product is a dairy product, which is non-toxic and protects the environment.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 2, the film is tough, it has good permeability to the glazed surface, film, etc., the bonding strength is large, brush Good sex, not brushed. Hand coating can be used in 2 ~ 30 minutes, which is more convenient and more efficient. Machine-coated products are initially sticky and firm, and they will not be disengaged after bundling and pressing.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 3, is a quick-drying product, the initial tack is fast, 3 about 0 minutes to destroy the paper fiber, tack After the knot, there is no bursting and the film is not brittle.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 4. It can be used at ambient temperature above -20 ℃ and below 70 ℃ without affecting the bonding performance. Excellent low temperature resistance and high temperature performance.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 5, products include hand-stick and machine-stick. The performance of the product is better than various sealants in the market, whether it is hand or machine.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; 6. This project has low investment, is produced by general equipment, has low cost, large market and high profit. It is an excellent project worth investing in various adhesive production enterprises or small and medium investors.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Notes on the use of window glue:

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; ①When using window glue, depending on the model of window glue, generally leave it dry after brushing the glue 2 ~ {{4} } min, after the translucent film is translucent, to prevent the glue from overflowing.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; ②The window glue has moisture resistance, so when there is glue, it can be wiped with cotton yarn dipped in gasoline or ethyl ester solvent Rinse the brush with water and then wash with solvent.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; ③Because of its quick-drying property, it is not suitable for repeated application, so as not to affect the application.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; ④The amount of glue should be moderate, and the glue should be applied by manual brushing. The amount of glue should be controlled at 100 g / About ㎡, or according to the specific product adhesive strength requirements, the specific amount of glue can be determined according to the speed of water absorption of paper and temperature. Paper that absorbs water slowly has less glue, and when the temperature is low, it has less glue, and vice versa. And after the bonding, the stiffness of the adhered product must be under pressure, to ensure the contact between the two adhered surfaces and press at least 1 h to enter the next process.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; ⑤When using window glue, the amount of sizing should be controlled so that the workpiece at the discharge port is not degummed. Glue overflows, too small sizing amount will affect the bonding strength. For the polished products because the substrate is too thin, the sizing amount can be adjusted appropriately to avoid degumming at the discharge end.