0010010 nbsp; 0010010 nbsp; 0010010 nbsp;Window glueIt is a one-component solvent adhesive, and a high-temperature-resistant adhesive is required for the removal of difficult-to-stick PP plastic materials.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; has the advantages of room temperature curing, easy operation, high bonding strength, fast positioning, high elasticity, soft film, non-toxic cured products, etc. ;

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; has good characteristics of water resistance, heat resistance, acid resistance, alkali resistance, corrosion resistance, oil resistance and no whitening.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; versatile, can be used for mutual adhesion and cross-bonding of rigid PP, PC, PE and ABS, PVC, wood, rubber and other materials

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Use of window glue products

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Window glue has a wide range of uses, can solve different difficult plastic problems such as PC, PE, ABS, etc. It is mainly used for PC, PE and ABS , PVC, rubber, ceramics, wood, cloth and other materials are inter-adhesive and cross-adhesive, which is the ideal bonding for plastic shells, PP, PE crafts and containers in the electronics industry of the home appliance industry, the radio industry, decoration, handicrafts, toy industry and other industries The adhesive of choice of materials can be used for painting and syringe operation.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Clean up the dirt on the surface of the adherend, keep it clean and dry;

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Directly apply window glue evenly on the surface of two adherends, just wait 3 ~ 6 Minutes, when the film is slightly non-sticky and the hand feels dry, align the two adherends with the adhesive, apply a little pressure to make the adhesive surface tight, and place it for 2-3 hours; metal, hard plastic The bonding of materials with higher requirements can be roughened with tools such as iron sand skin. Two times of glue application (after applying glue for a few minutes and then applying a second glue, slightly more than closing) effect is good.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; If the colloid is thick, use appropriate amount of ethyl acetate for dilution and mix well.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Note on the use of window glue

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; This type of product is flammable, storage and transportation are handled in accordance with the flammable rules;

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Use ventilation and ventilation during use, pay attention to safety, and keep the operation away from fire;

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; The container will be tightly capped after use to prevent the gel from solidifying. If the gel is too thick, dilute with appropriate ethyl acetate.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Double-sided adhesive is better than single-sided adhesive.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Do not move the bonding surface easily, otherwise air will enter and affect the strength.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; Heat treatment of the material before applying glue helps to improve the bonding strength.

0010010 nbsp; 0010010 nbsp; 0010010 nbsp; This product is sealed and stored in a cool place, the storage period is 1 years, when using the remaining window glue, please use the small Whether the quantity is qualified, and then used in large quantities. Beware of inhalation and ingestion to prevent children from touching!