PrintingBox glueGenerally, it is a glue that cannot be used less. How to control the glue to not be glued during use. It is very important to choose a good glue. Below, I share what I know, the solution to not glue.
1, choose the glue correctly. In production, it is important to choose the correct glue for the glue box. Once the glue is used incorrectly, it will cause the whole batch of corrugated color boxes to be glued.
2 The working environment of glue box workshop also needs to be considered when choosing glue. The glue used in winter and the glue used in summer are actually different, because the same brand and the same batch of glue are printed at different ambient temperatures, and their viscosity is different. The lower the ambient temperature, the higher the viscosity of the glue . Regardless of whether it is winter or summer, glue is required to achieve a viscosity that is convenient for production operations during the paste box production process.
4, the environment for paste boxes. The products after paste box need to be sent to high temperature environment and need to use high temperature resistant glue; if the corrugated color box after paste box needs to be sent to low temperature environment for packaging design, you need to choose low temperature resistant paste box glue.
5, glazing performance. If the automatic folder gluer is equipped with a spray gun, the corresponding glue spray should be selected. At the same time, the performance of the spray gun control system must also be considered. If the spray gun control system is a hot melt method, hot melt spray glue must be selected; if the spray gun control system is not heated, cold spray glue must be selected.
After the paste box production operation is completed, the storage of the finished product after the paste box should be determined according to the time when the glue is fully cured.
In the paste box production operation, the opening time of the glue should be fully considered, and the length of the fixed pressing time of the corrugated color box after the paste box should be determined according to the opening time and the curing time of the glue.
Related News
- How to choose a better quality glue
- What are the characteristics and precautions of window glue?
- What are the uses of aluminum foil tape?
- What should be paid attention to when using water-based varnish?
- What are the advantages of water-based varnish?
- Common faults and solutions of water-based varnish
- What factors affect the gloss of water-based varnish
- Reasons and solutions for spotting of aluminum coating film glue
- Why does the internal stress of the glue cause displacement of the compounding of the aluminized film glue?
- Brief introduction of aluminum foil adhesive
- What problems should be paid attention to in the transportation of window glue
- Viscosity control of water-based varnish
- Method for sticking laser film glue on surface of pressed flower card
- What to do if the glue is opened
- Advantages and applications of acrylic emulsion
- On thickening method and principle of acrylic emulsion
- Application process and precautions of aluminum coated film adhesive
- Attention to the use of water-based varnish
- The problem and solution of the low fastness of paste box glue
- Where is water-based varnish better than solvent-based varnish